Product Description: This kit contains the PCB and all the parts needed to build the uBotino board.
Price: $24.00
Before you check out, please choose the Shipping method.
The uBotino allows a robot builder to easily build a small robot that uses 2 small geared DC motors for driving, directly plug in 6 analog sensors, 5 digital sensors, 5 servos. It has an on board voltage LDO regulator, power switch, reset button, power LED, Arduino pin D13 LED, 16 MHz ceramic resonator, ISP programmer connector and FTDI cable connector. The ATmega168 microcontroller has Arduino bootloader installed. The board features 3 jumpers, one to select power for the servo pins (in case you want to use sensors and no servos), one to disable the D13 LED (in case you need to connect a servo to that pin) and another jumper to disable power to the motors (so they don’t move when programming). The 5cm x 5cm size of the board and Arduino software compatibility makes this board a perfect candidate for small robots.
Here is a picture of the assembled board:
Hi Gabriel,
I’m about to assemble my board, but had a hard time finding the assembly instructions http://robotxdesigns.ca/wp-content/uploads/2010/11/uBotino-guide.pdf . I was expecting that link on this page (or any or the other uBotino product pages).
Rik
Sorry Rik, I’ll place a link on this page.